Login / Register ID | EN
This page has no official English version. It was translated automatically and may contain errors. Read the original in Indonesian →
PJO Disahkan KTT, Bukan Inspektur Tambang: Alur dan Syaratnya
Foto: Pexels
Hukum Industri

PJO Approved by the Summit, Not Mining Inspector: Process and Requirements

The contract has been signed, the equipment has been mobilized to the location, and then the mining permit owner asks: Is your PJO approved? Many contractors realize at that point that a service business license alone is not enough to start working. There is still one person who must be approved first, and the approval does not come from a government office.

If you are currently processing the permits, the order of mining service permits has been discussed in standard certificates or IUJP. This article discusses the subsequent steps: the individuals who must be appointed and approved before work begins.

Two leaders at one location

Ministerial Regulation of Energy and Mineral Resources Number 26 of 2018 separates two top positions in the field.

The holder of IUP or IUPK is required to appoint a Head of Mining Engineering (KTT) before starting business activities (Article 10 paragraph 1). The KTT is the highest leader in the field and must be approved by the Head of Mining Inspector, abbreviated as KaIT (Article 7 and Article 10). He must also be competent in the field of mining technicalities.

Service companies have a similar obligation. The holder of the service permit must appoint an Operational Responsible Person (PJO) as the highest leader in the field (Article 5 paragraph 3 letter b). The difference lies in Article 9 paragraph 1: The PJO is approved by the KTT, not by the KaIT. Therefore, it is the KTT of the permit holder who decides whether your PJO is qualified or not.

Who appoints, who approves

Decree of the Minister of Energy and Mineral Resources 1827 K/30/MEM/2018 Attachment I details the procedures for each position.

Position Appointed by Approved by
KTT holder of IUP KaIT, or Head of the Department on behalf of KaIT
PJO board of directors of the mining service company KTT of the permit holder
Operational Supervisor KTT KaIT or Head of the Department, through the issuance of KPO
Technical Supervisor KTT KTT

For the KTT, Attachment I sets a deadline of 2 days for submission, 10 days for evaluation, and 2 days for the issuance of the approval letter. There is no deadline for the PJO at the ministry level, as the entire process occurs between you and the KTT.

Documents required for PJO by KTT

Attachment I lists the administrative requirements for the PJO:

  • the candidate must be an employee of the service company;
  • curriculum vitae;
  • organizational chart at the location showing the candidate in the highest position;
  • support letter from the board of directors and a commitment statement;
  • other requirements set by the KTT.

The last item is important. The level of certification that the PJO must hold is also determined by the KTT based on technical considerations. Two permit holders may require different levels for similar jobs, so ask about the requirements before appointing a candidate, not afterward.

For candidates who are foreign nationals, there is an additional requirement: passing a proficiency test in the Indonesian language at least at the intermediate level within 6 months.

KTT level follows mine size

The certification that the KTT must hold increases with the number of workers, in addition to production limits and mining methods:

KTT Class Number of workers Minimum certificate
III up to 50, without explosives First Operational Supervisor (POP)
II up to 200 Intermediate Operational Supervisor (POM)
I more than 200, including underground mines Principal Operational Supervisor (POU)

A permit holder whose mine grows from 180 to 230 workers needs to recheck the KTT class. That class may rise one level, along with the required certification.

If overlooked

Chapter VI of Regulation 26/2018 outlines administrative sanctions in stages. First, written warnings up to three times, each lasting no more than 30 calendar days (Article 51). If the obligations remain unfulfilled, business activities are temporarily halted, partially or entirely (Article 52). After that, the permit may be revoked (Article 53). The last two articles explicitly mention the holder of the service permit.

Decree 1827 itself was issued in 2018 as a guideline for good mining engineering principles, with the goal announced by the Ministry of Energy and Mineral Resources: to reduce workplace accidents in mines. This chain of approvals is part of that goal. Everyone leading work in the field has a clear superior who has assessed their capabilities.

Sources

  1. Decree of the Minister of Energy and Mineral Resources Number 1827 K/30/MEM/2018 on Guidelines for the Implementation of Good Mining Engineering Principles, Attachment I. JDIH Ministry of Energy and Mineral Resources. https://jdih.esdm.go.id/storage/document/Keputusan%20Menteri%20ESDM%20Nomor%201827%20K%2030%20MEM%202018.pdf
  2. Regulation of the Minister of Energy and Mineral Resources Number 26 of 2018 on the Implementation of Good Mining Principles and Supervision of Mineral and Coal Mining (BN 2018 No. 596). https://peraturan.go.id/files/bn596-2018.pdf
  3. Ministry of Energy and Mineral Resources (May 30, 2018). Quarter I 2018, 5 Ministerial Decrees Issued for Better Mining Management. https://www.esdm.go.id/id/media-center/arsip-berita/triwulan-i-2018-5-kepmen-esdm-diterbitkan-untuk-pengelolaan-pertambangan-lebih-baik
  4. Inspektur ID (August 31, 2020). Personnel Approval: PJO, summary of Decree 1827 Attachment I pages 24-26. https://www.inspektur.id/kaidah-teknik/persetujuan-personil/pjo